Skip to content

How to Sharpen Vg10 Steel

Last Updated on September 20, 2022 by Climent Rick

It is important to know how to sharpen your Vg10 steel properly in order to keep it in good condition. There are a few different ways that you can sharpen your Vg10 steel, and each method has its own advantages and disadvantages. The best way to sharpen your Vg10 steel will vary depending on what type of knife you have and how often you use it.

  • First, identify the angle you need to sharpen your blade at
  • For most VG10 steel blades, this will be around 20 degrees
  • Next, use a sharpening stone or diamond sharpener to hold the blade at that angle and sharpen it until you’ve achieved a burr on the edge of the blade
  • If you’re using a honing rod: After achieving a burr, find the “sweet spot” on your honing rod (this is usually around 600-1000 grit)
  • Run the blade along the rod until you’ve removed the burr completely and created a nice, even edge
  • If you’re using a diamond sharpener: Once you’ve achieved a burr, simply run the blade along the diamond sharpener until it’s been removed and you have an even edge
  • Finally, strop your blade on a leather strop or piece of denim to remove any residual metal from your newly sharpened edge and voila! You now have a razor-sharp VG10 steel blade

How I sharpen VG-10

Vg10 Sharpening Angle

There are a lot of different opinions out there about what the best sharpening angle is for VG10 knives. Some people say that a sharper angle is better, while others argue that a more obtuse angle is actually better for this particular type of steel. So, which is it?

In our opinion, the answer lies somewhere in the middle. We think that a sharpening angle of between 15 and 20 degrees is ideal for VG10 knives. This will give you a nice, keen edge without making the blade too fragile.

Of course, ultimately it comes down to personal preference. Experiment with different angles and see what works best for you and your knife!

Santoku Sharpener

A Santoku knife is a Japanese all-purpose kitchen knife. It is similar to a chef’s knife, but has a slightly different shape. The word “santoku” means “three virtues” or “three uses”, referring to the three main tasks that this knife can be used for: slicing, dicing, and mincing.

A Santoku sharpener is a tool that helps keep your Santoku knives in good condition. It is important to sharpen your knives regularly to maintain their sharpness and prevent them from becoming dull. A Santoku sharpener can help you achieve the perfect edge on your Santoku knife so that it works like new again.

There are many different types of Santoku sharpeners available on the market, so it is important to choose one that best suits your needs. Some factors you may want to consider include: how often you need to sharpen your knives, how many knives you need to sharpen at once, and what type of blade you have (ceramic or steel).

Asian Knife Sharpening Angle

If you’re looking to get the perfect edge on your knives, you’ll need to use the right sharpening angle. For Asian knives, that angle is 10-15 degrees. Using a too-low angle on your knife will result in a dull edge that can’t cut well.

On the other hand, using too high of an angle can damage your blade and make it more likely to chip or break. The sweet spot for getting a sharp, durable edge on your Asian knives is 10-15 degrees. To sharpen at this angle, you’ll need to use a honing rod or sharpening stone.

First, find the point where the blade meets the handle – this is the heel of the knife. Then, position your honing rod or stone so that it makes contact with the blade at a 10-15 degree angle from the heel. Use even pressure as you move the blade down the length of the honing rod or stone until it’s been Sharpened to your desired level.

Remember to always test your knife on something before cutting with it to ensure that it’s as sharp as you want it to be!

Best Whetstone for Vg10

There are a few factors to consider when purchasing a whetstone for your Vg10 knife. The most important factor is the grit of the stone. A higher grit stone will be able to better hone your blade and remove any nicks or imperfections.

However, a too high of a grit can damage your blade, so it is important to find the perfect balance. Another factor to consider is the size of the whetstone. Some stones are very large and can take up a lot of counter space, while others are much smaller and more convenient for travel.

Consider how you will be using your knife and choose the size accordingly. Finally, think about the price point that you are comfortable with. Whetstones can range in price from under $20 to over $100.

It is important to find one that fits within your budget but also offers good quality results. Overall, choosing the best whetstone for your Vg10 knife comes down to personal preference and needs. Consider all of the factors before making your final decision in order to get the most out of your purchase!

How to Sharpen Vg10 Steel
How to Sharpen Vg10 Steel 2


Is Vg10 Steel Easy to Sharpen?

VG10 is a popular steel used in knives and other cutting tools. It is well known for its excellent edge retention and toughness. But what about sharpening?

Is VG10 easy to sharpen? The short answer is yes, VG10 is relatively easy to sharpen. It is not the easiest steel to sharpen, but it is far from the hardest.

With a little practice, you should be able to get a nice sharp edge on your VG10 knife with no problem. There are a few things to keep in mind when sharpening VG10 though. First, because of its high carbon content, it can be susceptible to chipping if not sharpened correctly.

Second, the edge retention means that it will take longer to remove material when sharpening – so be patient! Overall, we would say that yes, VG10 is easy to sharpen. With a little care and attention, you should have no trouble getting a razor-sharp edge on your knife.

How Hard is Vg10?

VG10 is a Japanese stainless steel that is often used in high-end kitchen knives. It is considered to be one of the best steels for knife making and it is very popular among knife makers. VG10 has excellent edge retention and it is very easy to sharpen.

It is also resistant to corrosion and chipping.

What Steel is Better Than Vg10?

There is no definitive answer to this question as it depends on the specific application and requirements. However, in general, VG10 steel is considered to be a high-quality steel that offers excellent value for money. It is often used in knives and other cutting tools due to its superior edge retention and durability.

In addition, VG10 is also relatively easy to sharpen, making it a good choice for those who do not want to spend too much time maintaining their knives.

How Do You Sharpen Japanese Steel?

When it comes to sharpening Japanese steel, there are a few different methods that can be used. The most common method is probably using a whetstone, which is a type of grinding stone. However, other methods such as using diamond plates or even belts can also be effective.

As for the actual process of sharpening Japanese steel with a whetstone, it’s actually not too different from sharpening any other type of knife. The main thing to keep in mind is to use a consistent angle when you’re grinding the blade against the stone. A good rule of thumb is to hold the blade at around a 20 degree angle to the stone.

Once you’ve got your angle sorted out, it’s simply a matter of running the blade back and forth across the surface of the whetstone until you’ve achieved the desired level of sharpness. It’s important to remember to keep your strokes nice and even so that you don’t end up with an uneven edge on your knife. If you’re looking for a bit more precision when sharpening your Japanese steel knives, then you might want to consider using diamond plates instead of a whetstone.

These plates offer a much finer grit than most stones, which means that you’ll be able to get a really fine edge on your blades. The only downside to using diamond plates is that they can be quite expensive. If cost is an issue, then you might want to stick with using a whetstone instead.


It is important to know how to sharpen your Vg10 steel knives because they are made of a harder steel and require a different sharpening technique. First, you need to find a honing rod or diamond sharpener that is specifically designed for hard steels. Second, use a light touch when sharpening and be sure to hold the blade at the correct angle (15-20 degrees).

Third, use a honing oil or water on your stone to help keep the blade cool and prevent it from becoming damaged. Finally, test the edge on something soft like paper before using it on food. By following these steps, you can keep your Vg10 steel knives razor-sharp and ready for any meal prep task!

Leave a Reply

Your email address will not be published.