Skip to content

How to Sharpen Nutribullet Blades

Last Updated on September 20, 2022 by Climent Rick

If you’re like me, you love your Nutribullet. It’s a great way to make healthy smoothies and snacks on the go. But one thing that can be a pain is sharpening the blades.

Here’s a quick and easy way to sharpen your Nutribullet blades so they stay nice and sharp. First, remove the blade from the base of the Nutribullet. You’ll need a small wrench or pliers to do this.

Next, find a sharpening stone or steel. If you don’t have either of these, you can use a piece of sandpaper or even a nail file.

  • Unplug the Nutribullet and remove the blade assembly
  • Place the blade on a cutting board or other surface with a lip
  • Use a sharpening stone to sharpen the blades, using circular motions
  • Wipe the blades clean with a damp cloth and dry them before reassembling the Nutribullet

How to sharpen your blender blades. #nutribullet #magicbullet

Nutribullet Blades Locked Up

If you’re like me, you love your Nutribullet. It’s so convenient and easy to use-until the blades get locked up. Then it’s a big pain in the neck (literally, if you’re not careful).

Here’s what you need to know to fix the problem quickly and easily. The first thing to do is figure out what direction the blade is locked in. If it’s clockwise, then you need to turn it counterclockwise to loosen it.

The same goes for if the blade is locked in counterclockwise-you’ll need to turn it clockwise to loosen it up. Once you’ve determined which way to turn the blade, put a dish towel over the top of the blender (this will protect your hand from getting cut). Insert a butter knife or other flat utensil into the gap between the base and the blade, and apply pressure while turning the implement in the opposite direction of which the blade is locked.

With a little effort, you should be able to get the blade unlocked and back on track!

Nutribullet Replacement Blade

The Nutribullet is a powerful blender that can extract nutrients from whole foods. The blades are designed to break down tough food items like seeds and stems. Over time, the blades can become dull and need to be replaced.

There are two types of replacement blades for the Nutribullet: the Extractor Blade and the Mill Blade. The Extractor Blade is used for blending smoothies and juices. It has six fins that create a vortex that sucks ingredients down into the blade for thorough blending.

The Mill Blade is used for grinding coffee beans, nuts, and spices. It has four sharp teeth that quickly chop ingredients into smaller pieces. When choosing a replacement blade, it’s important to select the correct one for your needs.

If you’re not sure which blade to get, you can always contact customer service for help. Once you have the right blade, simply twist it onto the base of the blender until it’s tight. Then you’re ready to start making nutrient-rich drinks!

Magic Bullet Blades

Have you ever wondered what the difference is between the Magic Bullet blades? Well, wonder no more! In this blog post, we will go over all the different types of blades and their uses.

The first type of blade is the flat blade. This blade is great for making smoothies and milkshakes. It also works well for pureeing fruits and vegetables.

The second type of blade is the cross blade. The cross blade is ideal for chopping and mincing food. It can also be used to make salsa and guacamole.

If you need to make a quick salad, the cross blade will do the job nicely. The third type of blade is the shredding/grating disc. This disc is perfect for shredding cheese and chocolate.

It can also be used to grate ginger and garlic cloves quickly and easily. So, there you have it! Now you know all about the different types of Magic Bullet blades and their uses.

Which one will you use first?

Magic Bullet Blade Not Spinning

If you’re having trouble with your Magic Bullet blender, one of the first things you should check is the blade. If the blade isn’t spinning, it’s likely that something is blocking it or that it’s not attached properly. There are a few things you can do to try and fix the problem:

-Remove any obstructions from around the blade. Sometimes food or other debris can get caught in the blades, preventing them from spinning. Be careful when doing this as the blades are sharp!

-Make sure the blade is properly attached. The blade should snap securely into place on the base of the blender. If it’s not attached properly, it won’t spin correctly.

-Check for damage to the blades. If they’re bent or damaged in any way, they won’t work properly. You may need to replace them if they’re too damaged.

How to Sharpen Nutribullet Blades
How to Sharpen Nutribullet Blades 2


How Do You Sharpen a Blade on a Nutribullet?

If you’re like me, you love your NutriBullet. It’s so handy and easy to use – not to mention, it makes delicious smoothies! But one thing I’ve noticed is that over time, the blades on my NutriBullet seem to get dull.

So how do you sharpen them? It’s actually really easy to do. First, unplug your NutriBullet and remove the cup and blade assembly.

Next, take a look at the blades – you’ll notice that there are two different types of blades (the flat ones and the serrated ones). For best results, you’ll want to sharpen both types of blades. To sharpening the flat blades, start by holding the blade with the flat side up.

Using a honing rod or sharpening stone, hold it at a 20-degree angle and stroke the blade away from you about 5-10 times. Repeat this process on the other side of the blade. To sharpen the serrated blades, start by holding the blade with the serrated side up.

Using a honing rod or sharpening stone, hold it at a 45-degree angle and stroke each tooth of the blade away from you about 5-10 times. Repeat this process on the other side of the blade. Once you’ve finished sharpening both types of blades, reassemble your NutriBullet and enjoy your next delicious smoothie!

Why are Nutribullet Blades Not Sharp?

There are a few reasons why the blades in a NutriBullet are not sharp. First, the blades are designed to break down food quickly and efficiently, and sharp blades would actually be less effective for this purpose. Second, sharp blades would be more likely to cause injury, and the NutriBullet is designed to be safe and easy to use.

Finally, blunt blades require less maintenance and are less likely to rust over time.

How Do I Make My Blender Blades Sharper?

If your blender blades have become dull, there are a few different ways you can sharpen them. First, you can try using a honing rod. Run the blade of your blender along the rod in a back-and-forth motion to grind off any rough edges and restore sharpness.

You can also use a sharpening stone to achieve similar results. Another option is to use sandpaper. Start with a coarse grit sandpaper and work your way up to finer grits until the blades are nice and sharp again.

Just be careful not to overdo it or you could end up damaging the blades beyond repair! If all else fails, you can always buy new blender blades. This is definitely the easiest solution, but it will also cost you more money in the long run.

How Often Should You Replace Your Nutribullet Blade?

If you use your NutriBullet regularly, it’s important to replace the blade every six months. The blade is the part of the blender that does all the work, so it’s essential to keep it sharp and in good condition. A dull or damaged blade can make blending less efficient and can even cause damage to the motor.

To replace the blade, simply unscrew the old one and screw on a new one.


If you’ve noticed that your Nutribullet blades aren’t working as well as they used to, it might be time to sharpen them. Luckily, this is a relatively easy process that only takes a few minutes. First, unscrew the blade from the base of the blender.

Next, use a sharpening stone or honing rod to carefully sharpen the blade. Be sure to avoid touching the sharp edge of the blade with your fingers. Once you’re finished sharpening, screw the blade back into place and check to see if it’s working better.

Leave a Reply

Your email address will not be published.