Skip to content

How to Sharpen Leatherman Knife

Last Updated on September 20, 2022 by Climent Rick

If you own a Leatherman knife, then you know how important it is to keep the blade sharp. A dull blade can make it difficult to cut through even the softest of materials, and can be dangerous if you are using it for self-defense. In this article, we will show you how to sharpen your Leatherman knife so that it is always ready for action.

  • Open the Leatherman Knife blade to about a 45-degree angle
  • Place the blade on the sharpening stone at a matching angle
  • Use light pressure to push the blade along the stone in a forward motion
  • Continue this motion until you’ve reached the end of the stone, then flip the blade over and repeat on the other side
  • Once both sides are sharpened, open and close the blade a few times to ensure it’s properly aligned

How to Keep Your Leatherman Sharp (Work Sharp Guided Field Sharpener)

How to Sharpen Leatherman Serrated Blade

Assuming you are talking about the Leatherman Wave multi-tool, here is a detailed guide on how to sharpen its serrated blade. The first thing you need to do is open up the main pliers to get access to the blade. Once the pliers are open, locate the small notch near the hinge that allows you to pull out the blade.

With the blade extended, take a look at its shape and identify which part of it is serrated. The serrations are usually located near the tip of the blade. Now that you know where the serrations are, it’s time to start sharpening them.

First, find a sharpening stone or rod that’s meant for use with serrated blades. If you don’t have one of these, a regular honing stone or diamond sharpener will work in a pinch. Next, hold the knife at a roughly 20-degree angle to the stone and start running the serrations along it back and forth.

Be sure to use even pressure while doing this so all of the teeth get evenly sharpened. After a few passes on each tooth, your blade should be noticeably sharper than before. If it’s still not as sharp as you’d like, feel free to repeat this process until it is.

Just be careful not to overdo it or you may end up damaging your blade beyond repair!

How to Sharpen Leatherman Wave

If you’ve ever found yourself in need of a sharp blade while out on a hike or camping trip, then you know how frustrating it can be when your Leatherman Wave starts to get dull. Luckily, sharpening your Wave is a relatively easy process that only requires a few simple steps. First, start by opening up the pliers so that you have access to the blades.

Next, take a sharpening stone and run it along the length of each blade, working from the base to the tip. Be sure to use even pressure and strokes for best results. Once both blades are sufficiently sharpened, close up the pliers and give them a quick once-over to make sure everything is functioning properly.

And that’s it! With just a few minutes of work, your Wave will be as good as new and ready for whatever challenges come your way.

Leatherman Sharpening Stone

If you’ve ever used a Leatherman tool, you know how important it is to keep the blades sharp. A dull blade is not only ineffective, but can also be dangerous. That’s why Leatherman created the Sharpening Stone.

This handy little stone can quickly and easily sharpen all your blades, from scissors to knives. The Sharpening Stone is made of high-quality diamond abrasive material and comes with a durable carrying case. It’s small enough to fit in your pocket or tool kit, so you can take it with you wherever you go.

And best of all, it’s easy to use. Just open the case, remove the stone, and hold it against the blade you want to sharpen. Move the stone back and forth across the blade until it’s nice and sharp.

Whether you’re a casual user or a professional tradesman, keeping your tools sharp is important. And with the Leatherman Sharpening Stone, it’s easy to do.

How to Sharpen Leatherman Raptors

If you’re a fan of the great outdoors, then you know that a trusty pair of leatherman raptors are an essential part of your gear. But like any other tool, they need to be properly maintained in order to function at their best. That means keeping them clean and sharp.

In this article, we’ll show you how to sharpen your leatherman raptors so they’re always ready for action. First things first, you’ll need a few supplies before getting started: – A honing rod or diamond sharpener

– A clean rag or polishing cloth – Some lubricant (optional) Once you have everything gathered up, it’s time to get to work.

Start by cleaning off your leatherman raptors with the rag or polishing cloth. This will remove any dirt or debris that could clog up the sharpening process. Next, use the honing rod or diamond sharpener to draw the blade across in a sweeping motion.

Apply even pressure as you go back and forth until you’ve achieved a desired level of sharpness. If your blades are particularly dull, you may need to repeat this step several times. Finally, if desired, apply some lubricant to help protect the newly sharpened blades from rusting or tarnishing over time.

And that’s it! With just a few simple steps, you can keep your leatherman raptors in top condition and ready for anything Mother Nature throws your way.

How to Sharpen Leatherman Knife
How to Sharpen Leatherman Knife 2


How Do You Sharpen a Leatherman Pocket Knife?

Leatherman is a company that produces high quality pocket knives. In order to keep your Leatherman knife in top condition, it is important to sharpen it on a regular basis. Here are the steps you need to follow to properly sharpen your Leatherman knife:

1. Start by identifying the bevel of the blade. The bevel is the angle of the blade that intersects with the cutting edge. For most Leatherman knives, the bevel will be around 20-22 degrees.

2. Next, use a sharpening stone to hold the blade at the correct angle and then move the stone along the length of the blade. Apply even pressure as you move from one end of the blade to the other. 3. Once you’ve gone over the entire blade, flip it over and repeat on the other side.

Remember to maintain consistent pressure and strokes for best results. 4. Finally, use a honing rod or strop to further polish your blades edge .

What Angle are Leatherman Knives Sharpened At?

Leatherman knives are sharpened at a 22.5 degree angle. This is the same angle that is used to sharpen most kitchen knives. Leatherman recommends using a honing rod or diamond sharpener to maintain this angle.

How Do You Sharpen a Multi Tool Knife?

If your multi-tool contains a knife, chances are you’re going to want to keep that blade nice and sharp. Here’s how to do it: First, identify the type of steel your knife is made from.

This will determine the best way to sharpen it. Common types of steel include carbon steel, stainless steel, and tool steel. Next, choose the right sharpening stone for the job.

Sharpening stones come in a variety of grits, or abrasiveness levels. The higher the grit number, the finer the stone. For most knives, a medium-grit stone (around 400) will do the trick.

Once you’ve selected your stone, it’s time to get started sharpening! If your knife is very dull, you may need to start with a coarser grit and then move on to a finer one. But if it’s only slightly dull, starting with a fine grit should be just fine.

To sharpen your knife on a stone: 1) Wet the stone with water (or oil if using an oilstone). 2) Place the blade on the stone at about a 20-degree angle.

3) Using light pressure, push the blade across the stone away from you in one smooth motion. Be sure to keep that 20-degree angle consistent throughout! 4) Flip the blade over and repeat step 3 on the other side ofthe edge (i .e., giving yourself another 20-degree angle).

Can You Sharpen Leatherman Wire Cutters?

If your Leatherman wire cutters are starting to dull, you can sharpen them with a few simple steps. First, open the jaws of the wire cutters and place them on a flat surface. Next, use a sharpening stone or file to lightly sharpen the blades.

Be sure not to over-sharpen, as this can damage the blades. Finally, close the jaws of the wire cutters and test them on a piece of wire to make sure they’re sharp enough for your needs.


If you’re looking for a quick and easy way to sharpen your Leatherman knife, look no further! This guide will show you how to do it in just a few simple steps. First, start by folding the blade into the handle.

Next, use a sharpening stone or diamond file to work on the blade’s edge. Be sure to move the stone in an up-and-down motion, and apply even pressure as you go. After a few passes, check your progress by running your finger along the blade – it should feel nice and sharp.

If you want to take things one step further, you can also use a honing oil or stropping compound on your stone before starting to sharpen. This will help keep the blade extra sharp for longer periods of time. Just remember to clean off any excess oil before using your knife!

With these tips in mind, sharpening your Leatherman knife will be a breeze. So get out there and put them to good use!

Leave a Reply

Your email address will not be published.