Skip to content

How to Sharpen Iron Will Broadheads

Last Updated on September 20, 2022 by Climent Rick

When it comes to hunting, being able to shoot with precision is key. In order to do so, you need to have a sharpened broadhead. Broadheads are the blades that attach to the end of your arrow, and they need to be as sharp as possible in order for you to make a clean kill.

If your broadhead is not sharp enough, you run the risk of wounding an animal which not only causes it unnecessary suffering but also makes it harder for you to track and find.

  • Begin by holding the broadhead in your non-dominant hand
  • Place the blade of the sharpener against the leading edge of the broadhead, at a 20-degree angle
  • Apply pressure to the blade and move it along the length of the broadhead, being sure to keep a consistent angle
  • Repeat this process on both sides of the broadhead until you’ve achieved a sharp edge

How to Thoroughly Sharpen Iron Will Outfitters Broadheads

Kme Broadhead Sharpener

Kme broadhead sharpeners are one of the most popular types of sharpeners on the market. They are simple to use and can be very effective at sharpening your broadheads. Here is some information about how they work and how to choose the right one for you.

How Kme Broadhead Sharpeners Work Kme broadhead sharpeners work by using a grinding wheel to remove metal from your broadhead. This process will create a new, sharp edge on your broadhead that can help it penetrate better when hunting.

The grindstone is usually made from diamond or carbide, which are both very hard materials that can quickly remove metal. To use a Kme sharpener, you simply need to clamp your broadhead in the device and then run the grinding wheel over the edge of the blade. It is important to only run the grinder over the edge of the blade and not on any other part of the head, as this could damage your broadhead.

You should also only grind each side of the blade a few times so that you don’t remove too much metal and make yourbroadhead too weak. Once you have ground both sides of the blade, you can then use a honing stone to further refine the edge. This step is optional but can help ensure that your edge is as sharp as possible before heading out into the field.

Choosing A Kme Sharpener There are many different models of Kme sharpeners on the market, so it is important to choose one that will best suit your needs. If you plan on doing a lot of hunting, then you will want to get a model that has a large grinding wheel so that you can quickly sharpen your blades before heading out.

If you only hunt occasionally, then a smaller model with fewer features may be all that you need. You should also consider how easy it is to use the device and whether or not it comes with instructions or tutorials.

Iron Will Single Bevel Sharpener

If you’re looking for a high-quality, single bevel sharpener, the Iron Will Single Bevel Sharpener is a great option. This sharpener is made from durable materials and is easy to use, making it a great choice for those who want a reliable tool. The Iron Will Single Bevel Sharpener can sharpen both right and left handed blades, and comes with two different grits of diamond abrasives.

This makes it a versatile tool that can be used on a variety of knives. The Iron Will Single Bevel Sharpener is an affordable option that will provide years of use.

Work Sharp Broadhead Sharpener

If you’re a hunter, then you know how important it is to have sharp broadheads. After all, if your broadhead isn’t sharp, then your prey will just run away. And let’s be honest, no one wants that.

That’s why you need the Work Sharp Broadhead Sharpener. This easy-to-use sharpener will help keep your broadheads razor sharp so you can make the perfect shot every time. It comes with two sets of ceramic stones (fine and coarse) as well as a honing guide to ensure that your blades are always perfectly aligned.

Plus, it even has a built-in angle gauge for those times when you need to touch up your blades in the field. So if you’re looking for a way to keep your broadheads nice and sharp, then be sure to check out the Work Sharp Broadhead Sharpener. It’ll make sure that your next hunt is a success!

Cutthroat Broadhead Sharpening

If you hunt with a mechanical broadhead, at some point you’re going to have to sharpen the blades. Whether it’s because they’ve become dull from use or because they’ve gotten nicked up, sharpening your broadhead blades is a crucial part of maintaining your equipment. But how do you do it?

There are a few different ways to sharpen broadhead blades, but the most common is with a honing stone. Honing stones come in a variety of sizes and shapes, so you’ll need to find one that’s specifically designed for sharpening broadheads. Once you have your stone, simply run the blade across it until it’s nice and sharp.

If your blades are really damaged, you may need to use a file instead of a honing stone. Again, there are files specifically designed for sharpening broadheads, so be sure to get the right kind. Start by filing away any burrs or nicks on the blades, then work your way down to finer and finer grits until the blade is nice and sharp.

No matter what method you use to sharpen your broadhead blades, be sure to take your time and do it carefully. A dull or damaged blade can ruin an otherwise perfect hunt, so don’t let yours get in the way of a good time!

How to Sharpen Iron Will Broadheads
How to Sharpen Iron Will Broadheads 2

Credit: ironwilloutfitters.com

How Do You Sharpen Iron Will Broadheads?

There are a few different ways that you can sharpen your broadheads, but the most common way is to use a file. You will want to start by using a coarse file and then move to a finer one until you have the desired sharpness. Other methods include using a grinder or sharpening stone.

What Angle are Iron Will Broadheads?

Iron broadheads are usually made with a 75-degree point, but some manufacturers make them with a 90-degree point. The main reason for the different angles is that a 75-degree point will penetrate further into the animal than a 90-degree point. However, a 90-degree point will cause more tissue damage and bleeding than a 75-degree point.

Should You Sharpen Broadheads Out of the Box?

There’s a lot of debate surrounding whether or not you should sharpen your broadheads before using them. Some people say that it’s unnecessary and that the broadheads are sharp enough out of the box. Others argue that it’s better to be safe than sorry, and that you should always take the time to sharpen your broadheads before use.

So, who’s right? Here’s the thing: it depends. If you’re using lower-quality broadheads, then it’s probably a good idea to give them a little extra edge with some sharpening.

However, if you’re using higher-quality broadheads (like those from Rage), then they’re likely already plenty sharp and don’t need any extra work. Ultimately, it comes down to personal preference. If you feel more comfortable taking the time to sharpen your broadheads, then go for it.

But if you’d rather save yourself some time and hassle, then there’s no need to do so.

What Angle Should I Sharpen My Broadheads?

There are a few things to consider when choosing the angle to sharpen your broadheads. The first is the type of broadhead you are using. If you are using a fixed blade broadhead, you will want to sharpen it at a steeper angle, around 30 degrees.

This will ensure that the cutting edge is sharp and will penetrate through hide and bone. If you are using a mechanical broadhead, you can sharpen it at a shallower angle, around 20 degrees. This will help to keep the blades from getting dull too quickly.

The second thing to consider is what material you will be shooting through. If you are shooting through thick brush or bone, you will want a sharper angle so that the broadhead can penetrate easily. If you are shooting through thinner material, like paper or cloth, you can use a less sharp angle so that the blades do not get damaged as easily.

The third thing to consider is how often you plan on sharpening your broadheads. If you plan on Sharpening them frequently, then a shallower angle may be best so that they do not get dull too quickly. However, if you only plan on Sharpening them occasionally, then a steeper angle may be best so that they stay sharper for longer periods of time between sharpenings.

Ultimately, the decision of what angle to sharpen your broadheads at is up to personal preference and what works best for your specific needs. Experiment with different angles and see what works best for YOU!

Conclusion

Broadheads are one of the most important tools in a hunter’s arsenal, and it’s important to keep them in top condition. Here are some tips on how to sharpen iron will broadheads. First, start with a clean, dry surface.

Use a sharpening stone or file to remove any burrs from the blades. Be sure to work slowly and carefully so you don’t damage the blades. Next, use a honing oil or water to lubricate the stones or files.

This will help prevent overheating and damage to the blades. Work the honing oil into the metal using circular motions. Finally, use a polishing compound to buff out any scratches or imperfections.

Apply the compound evenly and rub it into the metal until it’s shiny. Wipe off any excess before using your broadheads again.

Leave a Reply

Your email address will not be published.