Skip to content

How to Sharpen Cricut Blade Without Foil

Last Updated on September 20, 2022 by Climent Rick

If you’ve ever used a Cricut cutting machine, you know that the blades can get dull pretty quickly. And when the blades are dull, your cuts will be less precise and your projects won’t look as good. So how do you sharpen the blades without ruining the foil?

  • Remove the blade from the Cricut machine
  • Place the blade on a flat surface with the cutting edge facing up
  • Use a sharpening stone to sharpen the cutting edge of the blade
  • Start at the base of the blade and work your way up to the tip
  • Wipe off any metal shavings from the blade with a clean cloth
  • Replace the blade in the Cricut machine and test it out on some scraps of paper or foil to make sure it is sharpened properly before using it on your project material

How to sharpen your Cricut blade with tinfoil

Does Aluminum Foil Sharpen Cricut Blades

If you’ve ever wondered if aluminum foil can sharpen your Cricut blades, the answer is yes! This technique is actually a pretty popular hack among crafters. All you need to do is cut a piece of aluminum foil to the size of your Cricut mat and then run it through your machine a few times.

The abrasiveness of the foil will help to dull any build-up on your blade and keep it nice and sharp.

How to Sharpen Cricut Explore Air 2 Blade

If you’ve ever used a Cricut Explore Air 2, you know that one of its best features is its blade. The blade is what allows the machine to cut through materials with ease, and it’s also what makes the cuts so precise. But like all blades, the Cricut Explore Air 2 blade will eventually become dull and will need to be sharpened.

Here’s how to do it: First, remove the old blade from the machine. You’ll find it located in the front, under the silver cover.

Once you’ve removed the old blade, insert the new one into the slot, making sure that it’s facing the right direction (the tips of the blades should be pointing downward). Next, use a sharpening stone or honing rod to sharpen the blade. Start by holding the stone against one side of the blade and moving it in an up-and-down motion.

Then turn the blade over and repeat on the other side. Be sure to keep both sides of the blade evenly sharpened. Once you’re finished sharpening, reinsert the blade into the machine and test it out on some scrap paper.

If everything looks good, you’re ready to get back to crafting!

How to Sharpen Cricut Rotary Blade

If you’ve ever wondered how to sharpen your Cricut rotary blade, wonder no more! It’s actually quite simple to do. Here’s what you’ll need:

-A sharpening stone (I prefer a diamond sharpening stone, but any type will work) -A honing oil or water (to lubricate the stone) -A rag or paper towel (to wipe away the debris)

-Patience! Start by lubricating your sharpening stone with honing oil or water. Then, holding the blade at a 30 degree angle, carefully run the blade along the surface of the stone.

Be sure to keep even pressure on both sides of the blade as you sharpen. You’ll want to do this 10-15 times on each side of the blade. Once you’re finished sharpening, wipe away any debris from the blade andstone with a rag or paper towel.

And that’s it! Your Cricut rotary blade is now nice and sharp and ready to use.

Cricut Blade Not Cutting

If your Cricut isn’t cutting properly, it could be due to a dull blade. When the blade becomes dull, it can cause several problems, including: – The machine may not cut all the way through the material.

– The cuts may be uneven or jagged. – The machine may make a lot of noise while cutting. If you’re experiencing any of these issues, it’s probably time to replace your blade.

Fortunately, this is a relatively easy process. Simply follow these steps: 1. Remove the old blade from the housing.

To do this, first remove the housing cap (the part that holds the blade in place). Then, holding onto the blade with one hand, unscrew the housing collar with your other hand. Be careful not to lose any of the small parts!

2. Insert the new blade into the housing and screw on the collar to secure it in place. Make sure that both sides of the blade are equally seated in their respective slots in order for it to work properly. If they’re not even, you may need to adjust them slightly until they are flush with each side of slot before tightening all he way down with your fingers only.

.3) Reattach 4) Now test out your new blade by cutting through some scrap paper or fabric. The cuts should be clean and precise.

How to Sharpen Cricut Blade Without Foil
How to Sharpen Cricut Blade Without Foil 2


How Do You Sharpen a Cricut Blade at Home?

It’s easy to sharpen your Cricut blade at home with a few simple supplies. You’ll need a sharpening stone, water, and oil. First, wet the sharpening stone with water and then add a few drops of oil.

Next, hold the Cricut blade at a 20-degree angle to the stone and use a back and forth motion to sharpen the blade. Be sure to do this evenly on both sides of the blade. After about 10 strokes on each side, your blade should be nice and sharp!

Can U Sharpen a Cricut Blade?

Cricut blades can be sharpened, but it’s not recommended. The reason is that the blade is made of steel and will quickly dull when sharpened. Also, the blade is designed to be replaced when it gets dull, so there’s no need to sharpen it.

How Do You Sharpen a Cricut Dull Blade?

If you’ve noticed that your Cricut cutting blade isn’t as sharp as it used to be, don’t worry – it can be easily fixed! First, check to see if your blade is actually dull or if something else is causing the problem. If the blade is dull, follow these steps to sharpen it:

1. Remove the old blade from the housing and insert a new one. 2. Use a fine-grit sandpaper to lightly sand down the top and bottom of the blade. 3. Wipe away any debris with a soft cloth.

4. Replace the blade in the housing and tighten the screws until snug.

What Do I Do If My Cricut Blade is Dull?

If your Cricut blade is dull, there are a few things you can do to fix it. First, try cleaning the blade with a soft cloth and some rubbing alcohol. If this doesn’t work, you may need to replace the blade.

To do this, follow these steps: 1. Turn off your Cricut machine and unplug it from the power source. 2. Remove the old blade from the housing by unscrewing the retaining screw.

3. Insert the new blade into the housing, making sure that the cutting edge is facing down. Screw in the retaining screw to secure it in place. 4. Plug in your machine and turn it on.

Test out the new blade by cutting something simple like paper or cardstock.


Assuming you don’t have any foil on hand, there are still a few ways you can sharpen your Cricut blade. One way is to use a pencil sharpener. Just insert the blade into the sharpener and turn it until the blade is nice and sharp.

Another way is to use sandpaper. Place some sandpaper on a flat surface and rub the blade back and forth over it until it’s nice and sharp.

Leave a Reply

Your email address will not be published.