Skip to content

How to Sharpen Carbide

Last Updated on September 20, 2022 by Climent Rick

Carbide is a very strong and durable material that is often used in tools and machinery. However, like all materials, it can become dull over time. When this happens, it is important to know how to sharpen carbide properly.

Here are some tips on how to sharpen carbide: 1. First, you need to select the appropriate type of file for your carbide tool or blade. There are two types of files that can be used on carbide: diamond files and tungsten carbide files.

If you are unsure which type of file to use, consult with a professional or the manufacturer of your Carbide tool. 2. Next, you need to identify the bevel angle on your Carbide tool or blade. The bevel angle is the angle at which the edge of the Carbide meets the body of the tool or blade.

It is important to know this angle so that you can file at the correct angle and not damage the Carbide tool or blade.

  • Place the carbide tool in a vise
  • Clamp the tool securely so that it does not move during sharpening
  • Use a fine-grit diamond sharpening stone to sharpen the cutting edge of the carbide tool
  • Work slowly and carefully, applying light pressure to avoid damaging the cutting edge
  • Sharpen both sides of the cutting edge evenly to maintain a sharp, consistent edge
  • Inspect the Carbide regularly while sharpening for any chips or damage to ensure continued optimal performance

How To Sharpen Brazed Carbide – How It Compares To Inserts

Grinding Wheel for Sharpening Carbide Tools

If you’re a machinist, then you know that one of the most important aspects of your job is keeping your tools sharp. And if you work with carbide tools, then you need a grinding wheel that’s designed specifically for sharpening carbide. There are a few things to consider when choosing a grinding wheel for carbide.

First, you need to make sure that the wheel is hard enough to handle the material. Carbide is extremely hard, so you’ll need a diamond or CBN (cubic boron nitride) wheel. Second, you need to choose the right grit size.

For general purpose sharpening, I recommend using a 100-120 grit wheel. If you’re looking for a finer edge, then go with a 200-250 grit size. Finally, pay attention to the bond type of the wheel.

The bond is what holds the abrasive particles together and affects how quickly the Wheel wears down. For carbide tooling, I recommend using an electroplated or vitrified bonded wheel. With these considerations in mind, let’s take a look at some specific grinding wheels that are great for sharpening carbide tools:

1. Diamond Wheel – This 100-grit diamond wheel from Weiler is ideal for general purpose sharpening of carbide tools. It has good durability and will hold up well under heavy use. 2. CBN Wheel – This 120-grit CBN wheel from Norton is perfect for those who want a slightly finer edge on their tools.

It cuts quickly and provides excellent results.

How to Sharpen Carbide Stump Grinder Teeth

If you own a carbide stump grinder, then you know that the teeth on this type of grinder are extremely sharp. However, over time, the teeth will become dull and will need to be sharpened. Luckily, this is a fairly easy process that can be done at home with just a few simple tools.

First, gather all of the necessary supplies: a file, a set of carbide burrs, and some lube oil. Next, remove the teeth from the stump grinder. Be careful as they are very sharp!

Once the teeth are removed, use the file to lightly score each tooth on all sides. This will help the carbide burrs to grip the tooth better when you start grinding them down. Next, use your carbide burrs to grind away at each tooth until it is nice and sharp again.

Make sure to keep the burr moving in order to avoid overheating and damaging the teeth. Finally, lubricate each tooth with some lube oil before re-installing them onto the stump grinder. And that’s it!

You’ve now successfully Sharpened your Carbide Stump Grinder Teeth!

How to Sharpen Carbide Metal Lathe Tools

If you’re working with carbide metal lathe tools, it’s important to keep them sharp. Here’s a step-by-step guide on how to sharpen carbide metal lathe tools: 1. Start by cleaning the tool.

Use a brush or compressed air to remove any debris or build-up on the tool. 2. Next, select the appropriate grinding wheel for your tool and attach it to your grinder. Make sure the wheel is rated for carbide materials.

3. Carefully position the tool against the rotating wheel and begin grinding away any dull or damaged edges. Apply light pressure and move slowly to avoid overheating the tool. 4. Periodically check your progress by holding the tool up to a light source – you should see a shiny, sharp edge starting to form.

Sharpening Tungsten Carbide

If you’re a machinist, welder, or fabricator, chances are you’ve had to sharpen tungsten carbide at some point. Tungsten carbide is an extremely hard material that’s used in many industrial applications where cutting and wear resistance are important. While it’s very tough, tungsten carbide can be sharpened with the right tools and techniques.

There are a few different ways to sharpen tungsten carbide. The most common method is grinding with a diamond wheel. This will give you a nice, clean edge on your tungsten carbide tooling.

However, if you don’t have access to a diamond wheel, you can also use a green silicon carbide wheel. Just be sure to keep your coolant flowing when using this type of wheel, as it can get very hot during use. Another way to sharpen tungsten carbide is by electrical discharge machining (EDM).

This process uses sparks to erode the material away and create a sharp edge. EDM is typically used for larger pieces of tungsten carbide that would be difficult to grind with a wheel. No matter which method you choose, always take care when sharpening tungsten carbide.

It’s easy to overheat the material and cause damage if you’re not careful. Always follow the manufacturer’s recommendations for your specific tooling and wheels.

How to Sharpen Carbide
How to Sharpen Carbide 2


What Stone Do You Use to Sharpen Carbide?

Carbide is a very hard material, and as such, it can be difficult to sharpen. However, using the right stone will make the process much easier. The best stone to use for sharpening carbide is a diamond stone.

Diamond stones are able to quickly and effectively sharpen carbide without wearing down the material.

Can You Sharpen a Carbide Bit?

Carbide-tipped bits are made of a harder material than steel, so they stay sharp longer. However, this also means that they are more difficult to sharpen. You can use a honing stone or diamond file to sharpen a carbide bit, but it takes some practice to get the hang of it.

The best way to keep your carbide bits sharp is to use them only for occasional drilling and not for everyday tasks.

Can You Sharpen Carbide Chisels?

Carbide chisels are made of extremely hard tungsten carbide, which is why they stay sharp for much longer than traditional steel chisels. However, this also means that they are more difficult to sharpen. There are a few ways to sharpen carbide chisels.

The first is to use a diamond sharpener, which will quickly create a new edge on the chisel. The second is to use a grinding wheel designed for carbide tools. This will take longer than using a diamond sharpener, but it will create a slightly different edge that some users prefer.

Whichever method you choose, be sure to follow the manufacturer’s instructions carefully to avoid damaging the chisel.

Can You Grind Carbide Inserts?

For those who work in the machining industry, or for anyone who regularly uses a drill or end mill, the question of whether carbide inserts can be ground is a common one. The simple answer is yes, but there are a few things to keep in mind when attempting to do so. Carbide inserts are made from extremely hard materials, and as such they require diamond grinding wheels in order to be ground properly.

If you attempt to use a regular aluminum oxide wheel, you will quickly find that it simply does not have the necessary abrasiveness to cut through carbide. In addition, because carbide is so hard it tends to heat up quickly when being ground. This can lead to the formation of cracks and chips in the insert if it isn’t cooled properly.

Finally, it’s important to make sure that your grinding wheel is perfectly balanced; otherwise you risk creating an uneven surface on the insert which could cause problems later on. With all of that said, if you have the proper equipment and take care while grinding, there’s no reason why you can’t successfully grind down a carbide insert. Just be prepared for it to take some time and effort!


If you’re looking to sharpen your carbide tools, there are a few things you need to know. First, it’s important to use a diamond wheel or file. Second, you need to be extra careful when sharpening carbide because it can break easily.

Third, make sure to cool the tool frequently while sharpening. And fourth, don’t try to sharpen too much at once – take your time and do it gradually. With these tips in mind, sharpening your carbide tools will be a breeze!

Leave a Reply

Your email address will not be published.