Skip to content

How to Configure Yealink Ip Phone

Last Updated on September 18, 2022 by Climent Rick

Yealink IP phones are one of the most popular options on the market for small businesses and home offices. They are known for their reliability and ease of use. In this article, we will show you how to configure your Yealink IP phone for use with your VoIP service.

Configuration Yealink SIP T-19 Via Phone

  • Download the latest firmware for your phone model from the Yealink website
  • Connect your phone to your computer using a USB cable
  • Open the downloaded firmware file in a text editor and copy the contents into the clipboard
  • On your phone, go to Menu > Settings > Upgrade and paste the copied firmware into the Upgrade field
  • Click Start to begin upgrading your phone’s firmware

How to Connect Yealink Phone to Network

If you’re looking to connect your Yealink phone to a network, there are a few things you’ll need to do. First, check that your phone is properly plugged into an Ethernet port on your router or modem. If it’s not, go ahead and plug it in.

Once that’s done, open up your web browser and type in “192.168.1.1” into the address bar. This will bring you to the admin page for your router or modem. From here, look for the section labeled “LAN.”

In the LAN section, you should see an option labeled “DHCP.” Click on this option and then scroll down until you see the “Phone” section. In the Phone section, select “Yealink” from the drop-down menu and then enter in your phone’s MAC address.

Be sure to save your changes before exiting out of the admin page. Now that your phone is properly configured, it should be able to connect to your network without any issues. If you’re still having trouble connecting, try restarting both your router and your phone.

Yealink Default Ip Address

If you have a Yealink IP phone on your network, you may be wondering what the default IP address is. By default, most Yealink IP phones have an IP address of 192.168.1.64. However, there are a few different models that use different default IP addresses.

If you need to find the specific default IP address for your model of Yealink phone, you can check the manual or the website. Once you know the default IP address, you can access the phone’s web interface by entering the address into a web browser. From here, you can change the phone’s settings and configure it for your needs.

Yealink Phone Manual

If you are looking for a Yealink phone manual, there are a few places you can find one. The first place to check is the Yealink website. Here you will be able to download PDF versions of their user manuals.

If you cannot find what you are looking for on the website, another option is to search for the manual on Google. You may be able to find a PDF version of the manual that way. Finally, if all else fails, you can always contact Yealink customer support and they should be able to help you out.

Yealink Configuration Tool

If you manage Yealink IP phones, the Yealink Configuration Tool is a valuable tool to have in your arsenal. This software allows you to mass configure and update settings on your Yealink phones, making it easy to keep all of your devices up-to-date and consistent. In this blog post, we’ll give you an overview of the Yealink Configuration Tool and how it can help you manage your Yealink IP phones.

We’ll also provide some tips on using the tool and troubleshooting common issues. The Yealink Configuration Tool is a free software application that can be downloaded from the Yealink website. Once installed on your computer, the tool allows you to connect to one or more Yealink IP phones and make changes to their configuration settings.

The configuration settings that can be modified with the Yealink Configuration Tool include: network settings, phone features, ring tones, language options, display contrast, time zone/date/time format, web server password protection, SIP account information, XML Browser password protection, auto provisioning URL/filename/server path/username/password, UPnP Settings (enable/disable), TR069 Settings (enable/disable), OpenVPN Settings (enable / disable). In addition to these options being configurable via the phone’s web interface GUI; they are also configurable through the configuration tool. The main benefit of using the configuration tool vs modifying these same settings via the phone’s web interface is that changes made with the configuration tool will push out those same modifications across all managed devices at once – saving time when making bulk changes.

To use the Yealink Configuration Tool , simply enter in the IP address(es) of the phone(s) you wish to modify into “Phone 1” field (you can add additional lines for Phone 2 , Phone 3 , etc if needed). If all of your phones are on a local subnet behind a common router then you only need to inputthe router’s WAN IP address into “Phone 1” field followed by “/24” into “Subnet Mask” field – this will automatically fillin all possible addresses for devices on that subnet range . After entering in target device info click “Scan”.

Doing so should populate fields for “Model”, “Version”, & “MAC Address” if successful .

How to Find Ip Address of Yealink Phone

If you need to find the IP address of a Yealink phone, there are a few different ways that you can do this. The easiest way is to simply look at the LCD screen on the front of the phone. The IP address will be displayed there.

If for some reason you can’t see the IP address on the LCD screen, you can also try looking in the phone’s web interface. To do this, open a web browser and enter the URL for the phone’s web interface. The defaultusername and password are both “admin”.

Once logged in, go to the “Network” page and then look under “IP Settings” for the IP address. Finally, if neither of those methods work, you can try connecting your computer directly to the phone using an Ethernet cable. Once connected, open a command prompt and type “ipconfig /all”.

This will display all of your network settings, including the IP address for your Yealink phone.

How to Configure Yealink Ip Phone
How to Configure Yealink Ip Phone 2

Credit: www.yealink.com

How Do I Configure Yealink?

Assuming you would like a step-by-step guide on how to configure a Yealink IP phone: 1. Log into the web interface of your Yealink phone. The default password is “admin”.

2. Go to the “Network” tab and select “General”. 3. Enter the IP address, subnet mask, gateway and DNS information under the “WAN” section. 4. Scroll down and click “Apply” to save your changes.

5. Now go to the “Account” tab and select the account you want to edit (usually labeled as “Account 1”). 6. Enter your SIP username, password and server domain under the “Basic” settings section. 7. Scroll down and click “Apply” to save your changes again.

8. That’s it!

How Do I Find My Yealink Phone Ip Address?

If you need to find your Yealink phone’s IP address, there are a few different ways you can do it. The first way is to check the phone’s display. On the main screen of most Yealink models, the IP address is displayed in the top right corner.

If your phone doesn’t have a display, or if the IP address isn’t showing up for some reason, you can also find the IP address in the phone’s web interface. To access the web interface, open a web browser and enter the phone’s IP address into the address bar. The default username and password for most Yealink models is “admin” (without quotes).

Once you’ve logged in, click on the “Network” tab and then select “IP Parameters” from the left-hand menu. The IP address will be listed under “IP Address”. If you still can’t find your phone’s IP address, try pressing *#*#96#*#* on your keypad.

This should bring up a diagnostic menu where you can find the IPaddress listed under “Network Information”.

How Do I Connect My Yealink Ip Phone to My Network?

Assuming you have a Yealink IP phone and want to connect it to your network, here are the steps: 1. Connect one end of an Ethernet cable to the LAN port on the back of your Yealink IP phone. 2. Connect the other end of the Ethernet cable into an available Ethernet port on your router, switch or hub.

3. If you are using a PoE (Power over Ethernet) enabled device, no additional power supply is required as the phone will receive power through the Ethernet cable. If not, connect the AC adapter to an available power outlet and then connect the DC IN jack on the back of your phone to the adapter. 4. Make sure that your computer is connected to your network either wirelessly or via another Ethernet cable plugged into your router, switch or hub.

5. Press and hold down * key while you plug in power cord for three seconds until display shows “Updating”. After around 30 seconds if everything has gone well, you should see a display similar to this indicating that there is an active network connection: If you do not see a display like this after completing these steps, please check that all cables are properly plugged in and that your computer is indeed connected to your network before proceeding troubleshooting steps outlined in user manual beginning on page 55 .

How Do I Connect My Phone to Yealink?

Assuming you would like a step-by-step guide on how to connect your phone to Yealink: 1. Locate the phone’s Ethernet port and connect one end of an Ethernet cable to it. If your phone has a pass-through port, plug the other end of the cable into that.

Otherwise, plug it into an available LAN port on your router or switch. 2. Connect the power adapter to the Power (PWR) port and plug it into an AC outlet or PDU. 3. Press and hold down the Page button until you hear a dial tone.

4. Enter **#** followed by your 4–6 digit admin password; then press # again (the default password is 0000). The display will show Password OK if entered correctly. If not, re-enter your password slowly and carefully until Password OK appears on screen 5. To change your password, see Change administrator password below under Advanced Options 6 .

On some models, after successful login you may see Phone Locked 7 . This can be ignored; simply press Cancel 8 . 9. Using the navigation keys, scroll up or down to Network Configuration and press Select 9 .

Alternatively, enter **110** then press # 10 . 10.. Use the navigation keys to scroll up or down through the list of network parameters 11 , selecting each in turn pressing Select 12 when highlighted:

IP Address – this should be set to Static unless you are using DHCP mode 13 , in which case it should be set to DHCP 14 Default Gateway – this is usually the IP address of your router 15 DNS Mode – select Auto 16

Subnet Mask 17 TFTP Server 1 18 HTTP Server 19

Conclusion

If you want to configure your Yealink IP phone, there are a few things you’ll need to do. First, connect the phone to your computer using an Ethernet cable. Next, open up a web browser and type in the IP address of the phone.

Once you’re logged in, you’ll need to go into the settings menu and change a few things. For example, you’ll need to set the time and date, choose your language, and enable or disable certain features. Once you’ve made all of your changes, be sure to save them before exiting the menu.

Leave a Reply

Your email address will not be published.