Skip to content

How to Configure Synology Nas

Last Updated on September 18, 2022 by Climent Rick

If you have a Synology NAS, you know how convenient it is to have all of your data in one place. But what if you want to access that data from another location? In this article, we’ll show you how to configure Synology NAS so that you can access it from anywhere.

First, open the Control Panel and go to Network Services. Select the DSM (DiskStation Manager) option and click on the Enable button. Next, select the WebDAV service and click on the Enable button.

Once the service is enabled, click on the Apply button. Now, open a web browser and type in https://[your_synology_nas_ip]:5001/. You will be prompted for a username and password.

Enter your credentials and click on the Login button. Once you are logged in, Click on the “Control Panel” link in the top-right corner of the page. Then, Click on “Shared Folder.”

Next to each folder listed here, there is an “Action” drop-down menu. Select “Edit” from this menu next to the folder that you want to share over WebDAV.

  • Download and install the Synology Assistant on your computer
  • Launch the Synology Assistant and locate your Synology NAS within the local network
  • Right-click on your Synology NAS and select “Configure”
  • In the “Network” tab, select “Enable DHCP server”
  • In the “Storage” tab, create a new volume and choose RAID type as desired
  • In the “Security” tab, enable password protection for user accounts
  • Click “Apply” to save changes

Synology Assistant

Synology Assistant is a desktop utility that helps you connect to Synology DiskStation Manager (DSM), check the status of your disk volumes and RAID arrays, monitor CPU and memory usage, create desktop shortcuts for shared folders, and more.

How to Setup Synology Nas Ds220+

Synology’s DS220+ is a great NAS for those looking to get started with home or small office data storage. It offers good performance and features, at a reasonable price. In this blog post, we’ll show you how to set up your DS220+ and get it running smoothly.

We’ll start by unboxing the NAS and connecting it to your network. Then we’ll install Synology’s DSM software onto the NAS, which will give you a graphical user interface for managing your data. After that, we’ll create some users and groups, so that you can control who has access to your data.

Finally, we’ll create some shared folders, so that you can start storing and sharing files on the NAS. So let’s get started!

Synology Nas Default Ip

When you set up your Synology NAS, the device is automatically assigned a default IP address. This address is used to access the web-based management interface for your NAS. You can find the default IP address for your specific model of Synology NAS in the user manual.

If you need to change the default IP address for your NAS, you can do so through the web-based management interface. To access this interface, enter the default IP address into a web browser on a computer connected to the same network as your NAS. Once logged in, navigate to the Network section and select “Network Interface.”

From here, you can edit the settings for each network interface on your NAS. Make sure to save any changes before exiting.

Nas Setup for Dummies

Nas, or network-attached storage, is a great way to store and share files on your home network. But if you’re not familiar with networking, the process of setting up a nas can be confusing. In this blog post, we’ll walk you through the process of setting up a nas step-by-step, so even if you’re a networking novice, you’ll be able to get your nas up and running in no time.

First, you’ll need to purchase a nas device. There are many different types and brands of nas devices available on the market, so it’s important to do your research to find the one that best meets your needs. Once you’ve selected a device, follow the instructions that come with it to properly set it up.

Next, you’ll need to connect your nas to your router. This will allow your devices to communicate with each other over the network. To do this, simply use an Ethernet cable to connect the two devices.

Once your nas is connected to your router, open up a web browser and type in the IP address of your nas into the address bar. This will bring up the web interface for your device where you can configure its settings. By default, mostnas devices will have a user name and password set (usually admin/admin).

Enter these credentials when prompted and then take some time to explore all of the options that are available to you in the web interface. From here, you can change things like sharing permissions and create user accounts if desired. Now that your nas is all set up and configured, it’s time to start using it!

Simply copy any files that you want to store on the network onto your nas device and they will be accessible from any computer or mobile device on your network. You can also install apps onto yournas device that will allow you access additional features and services, such as media streaming or cloud backup . And that’s all there isto it!

By following these simple steps ,you can easily set up a powerful and convenient file storage solution for yourself or foryour whole family .

Synology Setup Assistant

If you’re looking to set up a Synology NAS, the Setup Assistant is a great tool to get you started. This utility will walk you through the process of setting up your NAS, configuring network settings, and installing any required software. In this blog post, we’ll provide a detailed overview of how to use the Setup Assistant to get your Synology NAS up and running.

The first thing you’ll need to do is launch the Setup Assistant from the main menu. Once the assistant opens, you’ll be prompted to select your language and time zone. After making your selections, click “Next” to continue.

On the next screen, you’ll be asked to create a new user account. Enter a username and password for your account, then click “Next” to continue. Now it’s time to choose which type of installation you want: Basic or Advanced.

If you’re not sure which one to choose, we recommend selecting Basic. This option will install all of the necessary software for most users. If you know that you need specific features that aren’t included in Basic mode, select Advanced mode instead.

Once you’ve made your selection, click “Next” again. The next screen allows you select which hard drives you want to use with your NAS. If this is your first time setting up a Synology NAS, we recommend using all of the available drive bays so that you have maximum storage capacity.

Once you’ve made your selections here, click “Next” once again.” Now it’s time for system setup!

On this screen, you can give your Synology NAS a name (we recommend something easily recognizable like “Media Server”). You can also enable disk encryption if desired; this feature adds an extra layer of security by encrypting all data stored on theNAS . Finally ,you can choose whether or not yo u want automatic updates enabled . We recommend leaving this option enabled so thatyourNAS always hasthe latest security patches and features . Whenyou’re finishedwiththis section ,click ” Next”to continue . Atthis point ,theSetupAssistantwill begininstallingtheSynology DiskStationManager (DSM) operating system ontoyourNAS .This may takea few minutesdepending onyournetwork speedandhardware configuration …so grab acupof coffeeand waitforit tobefinished !

How to Configure Synology Nas
How to Configure Synology Nas 2


How Do I Setup My Synology for the First Time?

Assuming you have already unpacked and set up your Synology NAS, the following instructions will guide you through its initial configuration. Please note that this process will vary slightly depending on which model of Synology NAS you have. 1. Connect your Synology NAS to your router using an Ethernet cable.

2. Launch a web browser and type in into the address bar. This will automatically redirect you to the Synology Assistant, which is a discovery tool that can help you locate your DiskStation on the network and configure it for use. 3- If you happen to see more than one DiskStation listed in the Synology Assistant, please select the one with the MAC address that matches yours (this can be found on the back or bottom of your DiskStation).

4- Once selected, click “Start Setup” and follow the on-screen instructions to complete your setup. At this point, you will be asked to create a username and password for your administrator account. Be sure to choose something strong and secure for this information!

5- After completing these steps, congrats! You have now officially set up your new Synology NAS!

How Do I Set Up a New Synology?

Setting up a new Synology is actually pretty straightforward. In this blog post, we’ll walk you through the process step-by-step so that you can get your NAS (Network Attached Storage) up and running in no time. Before we begin, there are a few things you’ll need to have on hand:

1. A Synology NAS server. Obviously. 🙂

2. An Ethernet cable. This will be used to connect your NAS to your router or modem. 3. A computer with internet access.

This will be used to set up your DSM (DiskStation Manager), which is the software that runs on your Synology NAS. 4. A hard drive or two (optional). If you’re planning on using your NAS for storage, then you’ll need one or more hard drives to store data on.

We recommend getting at least two drives so that you can set up redundancy (more on that later). 5 .A UPS (uninterruptible power supply) (optional).

This isn’t strictly necessary, but if you want to ensure that yourNAS stays online even if there’s a power outage, then a UPS is a good idea . 6 .Patience!

Setting up a newNAS can take some time, especially if you’re configuring it for storage purposes . With that said, let’s get started! The first thing you’ll need to do is connect yourSynology NASto your router or modem using anEthernet cable . Once it’s plugged in , turnon the device by pressingthepower buttonon the back .

How Do I Setup a Synology Nas As a Network Drive?

If you’re looking to add some extra storage to your home or office network, then a Synology NAS (Network Attached Storage) device is a great option. In this article, we’ll show you how to set up your Synology NAS as a network drive so that it can be accessed by all the devices on your network. The first thing you’ll need to do is connect your Synology NAS to your router via an Ethernet cable.

Once it’s connected, power on the device and wait for it to boot up. Next, open up a web browser and type in the IP address of your Synology NAS. This can be found in the device’s manual or by checking your router’s DHCP table.

Once you’ve logged in, go to the Control Panel and select Network Services. Here, you’ll want to enable the SMB/AFP service so that Windows and Mac computers can access the NAS drive. You can also enable other services such as NFS if needed.

Now that the service is enabled, click on File Station and create a new shared folder. Give it a name and choose which users should have access to it. By default, everyone will have read-only access but you can change this if needed.

To test things out, try accessing the shared folder from another computer on your network. If everything is working correctly, you should now be able to read/write files to your Synology NAS just like any other network drive!

What is the Default Ip for Synology Nas?

The default IP address for Synology NAS is You can access the Synology NAS through a web browser by typing in the IP address into the URL bar.


This blog post walks the reader through how to configure a Synology NAS, which is a type of network attached storage device. The author first goes over the different models of Synology NAS and their features. He then provides step-by-step instructions on how to connect the NAS to a router and set it up for use.

Finally, he gives some tips on troubleshooting common problems that users may encounter.

Leave a Reply

Your email address will not be published.