Skip to content

How to Configure Http Server in Cisco Packet

Last Updated on September 18, 2022 by Climent Rick

In this blog post, we will be discussing how to configure Http Server in Cisco Packet. We will go over the different configuration options and give a brief overview of each. By the end of this post, you should have a better understanding of how to configure Http Server in Cisco Packet.

HTTP Server Cisco Packet Tracer

  • To configure a Cisco HTTP server, you’ll need to first enable the web server feature with the “ip http server” command
  • Next, you’ll need to specify the location of your website’s files with the “ip http path” command
  • Finally, you can use the “ip http access-class” command to restrict access to your server based on IP addresses or subnets

How to Configure Http Server in Cisco Packet Tracer Pdf

The process of configuring a HTTP server in Cisco Packet Tracer is a simple one that can be completed in just a few steps. This guide will walk you through the process of setting up your own HTTP server so that you can host your own website or web application. Before we begin, it’s important to note that this guide assumes that you have already installed and configured Cisco Packet Tracer on your computer.

If you haven’t done so already, please refer to the official documentation for instructions on how to do this. Once Cisco Packet Tracer is up and running, open the program and click on the “Add Device” button in the top-left corner of the window. In the “Device Type” drop-down menu, select “Router.”

For our purposes, we’ll be using a Router model 1841 with IOS version 15.0(1)M4a. Once you’ve selected your router model, click “OK.” Now that we have our router added to the simulation, we need to configure it so that it can act as a HTTP server.

To do this, double-click on your router in the simulation window and enter the following commands into the console: conf t ip http server ip http secure-server exit Save your configuration by entering “wr” into the console and pressing Enter.

Your router should now be configured as a HTTP server!

How to Enable Http Server on Cisco Router

Most Cisco routers that are installed in business networks have the HTTP server feature disabled by default. This is because the HTTP server can be used to manage the router and make changes to its configuration. For this reason, it’s important to make sure that only authorized users have access to the HTTP server.

If you need to enable the HTTP server on a Cisco router, there are a few things you’ll need to do first. First, you’ll need to create a user account that will be used to access the HTTP server. The account should have a strong password that can’t be easily guessed.

Once you’ve created the account, you’ll need to configure the router to allow access from that account. Once you’ve done all of this, you should be able to connect to the HTTP server on your Cisco router by going to http://router_ip_address in your web browser. You’ll be prompted for your username and password, and then you’ll be ableto view and change the router’s settings.

Ip Http Server Command Not Working Packet Tracer

If you’re troubleshooting a connectivity issue on a Cisco router, one of the first commands you should try is the “ip http server” command. This command enables the HTTP server feature on the router, which allows you to access the router’s web interface from a web browser. However, in some cases, this command may not work as expected.

There are a few things that could be causing this issue. First, make sure that you’re using the correct syntax for the command. The proper syntax is “ip http server port [port number]”.

If you omit the port number, the default port (80) will be used. Another potential issue is that the HTTP server feature may not be enabled in your IOS image. To check if this is the case, use the “show ip http” command.

This will display all of the HTTP-related commands that are available in your IOS image. If there’s no output from this command, then it’s likely that HTTP servers are not supported in your IOS image. If you’re still having trouble getting the “ip http server” command to work properly, feel free to post a question in our Cisco Support Community and we’ll be happy to help!

How to Disable Http Service in Cisco Router

If you want to disable the HTTP service on a Cisco router, there are a few different ways that you can do this. One way is to simply go into the configuration mode and enter the no http server command. This will immediately disable the HTTP service on the router.

Another way to disable the HTTP service is to use the management interface command. This will allow you to specify which interfaces should not have the HTTP service enabled. Finally, you can also use access control lists (ACLs) to prevent any traffic from reaching the HTTP port on your router.

Whichever method you choose, make sure that you save your changes before exiting configuration mode so that they take effect.

How to Configure Dhcp Server in Cisco Packet Tracer

If you’re studying for the Cisco CCNA exam, then you’re probably already familiar with Cisco Packet Tracer. This powerful network simulator can be used to create a virtual network environment for testing and experimentation. One of the features of Packet Tracer is the ability to configure a DHCP server.

In this blog post, we’ll take a look at how to configure a DHCP server in Cisco Packet Tracer. The first thing you need to do is add a router to your Packet Tracer project. Then, double-click on the router and choose Configure from the pop-up menu.

In the Router Configuration window, click on the Interfaces tab. Here, you’ll see all of the router’s interfaces listed. Select one of the Ethernet interfaces and click Edit.

In the Interface Configuration window that appears, make sure thatDHCP Serveris checked under IPv4 Protocols. Then, enter an IP address range for your DHCP server in the text box next to it (for example, 192.168.1 .128/25). Click OK when you’re done.

Now that your DHCP server is configured, you can add clients to your network and they will automatically receive an IP address from your DHCP server when they connect!

How to Configure Http Server in Cisco Packet
How to Configure Http Server in Cisco Packet 2


How Do I Configure Http?

Assuming you would like a step-by-step guide on configuring HTTP: 1. Download and install a web server software package if you do not already have one installed. Some popular choices include Apache HTTP Server, Nginx and Microsoft IIS.

2. Set up your web server software according to the instructions provided by the manufacturer. This will usually involve specifying the location of your website’s files and telling the server how to respond to requests for those files. 3. Configure your firewall to allow incoming connections on port 80 (or the port you have chosen for HTTP).

4. Test your configuration by accessing your website from a browser using its URL (e.g.,

How Do I Enable Http Server?

Assuming you would like to enable an HTTP server on your computer: Enabling an HTTP server on your computer will allow you to view webpages that are stored on your hard drive. Any computer can be turned into a web server by installing server software and connecting the machine to the internet.

The steps for doing this will vary depending on the operating system you are using. For Windows, there is a program called Apache HTTP Server that can be downloaded from their website ( Once installed, follow the instructions provided by Apache to configure the program and set up your virtual host(s).

After everything is configured, start the Apache service and navigate to http://localhost in a web browser to make sure the server is running correctly. If you are using macOS, there is already a web server called Apache included with every installation. To start it up, open Terminal and enter the following command: sudo apachectl start .

You should then be able to see the default webpage by going to http://localhost in a web browser. If you want more control over configuration options, take a look at MAMP (, which provides a graphical interface for setting up and managing MySQL databases and PHP websites on macOS computers. Linux distributions usually come with some type of package manager pre-installed (e.g., aptitude or yum) that makes it easy to install software from repositories maintained by developers.

For instance, if you are using Ubuntu 16+, you can install Apache by opening Terminal and entering sudo apt install apache2 .

How Do I Enable Http And Https on a Cisco Router?

If you want to enable HTTP and HTTPS access on a Cisco router, you need to first configure the router with a web server. This can be done using the web server wizard in the Cisco IOS CLI. Once the web server is configured, you can then enable HTTP and HTTPS access by creating an ACL that allows traffic from the outside interface to the web server port (TCP 80 for HTTP or TCP 443 for HTTPS).

Finally, you need to create a NAT rule that will allow traffic from the outside interface to be forwarded to the web server.

How Do I Connect to a Webserver in Packet Tracer?

Assuming you would like a Packet Tracer tutorial on how to connect to a web server: In order to connect to a web server in Packet Tracer, first open the application and click on File > New Blank Document. Once the new document has opened, drag and drop two devices from the Devices toolbar onto your workspace – these will be your web server and your computer.

In this example we will use an Ubuntu Linux Server device and a Windows PC. Next, double-click on each device to open up the Device Configuration window. On the left side of this window, under Device Type, make sure that both devices are set as End Devices.

Then, go to the Interfaces tab (still in Device Configuration) and configure interfaces for each device. For our purposes we will use FastEthernet0/0 for both devices. Now it’s time to connect our devices with cables.

Click on Connections > Ethernet > Straight-Through Cable from the top menu and then click-and-drag to connect FastEthernet0/0 of each device together. The next step is to assign IP addresses so that our devices can communicate with each other over the network connection we just created. With both devices still selected, go back to the Devices toolbar and click on Addresses & Routing > Address Assignment > IPv4 Address/Mask… from the top menu.

In the IPv4 Address Assignment dialog box that opens up, select Manual under Method (if it isn’t already selected), then enter in address field for one device and 172.16..2 in address field for other device; finally check off Include Subnet Mask… at bottom before clicking Apply button followed by OK button when done configuring IPv4 addresses for both devices..


If you want to configure a Cisco Packet Tracer HTTP server, there are a few things you need to do. First, open the “Network Objects” menu and create a new object. Call it something like “HTTPServer.”

In the “Object Type” drop-down menu, select “Custom.” In the “Protocols” tab, check the box next to “HTTP.” In the “General” tab, enter the IP address of your server in the “IP Address” field.

Leave the default port (80) in the “Port” field. In the Cisco Packet Tracer interface, click on your newly created HTTPServer object and then click on the “Configure” button. A new window will open up with several tabs.

Click on the tab labeled “Web Server.” Check the box next to “Enabled,” and then type in a root directory for your website files in the text field below it. Once you have done that, click on the OK button and close out of all of the windows.

Your HTTP server is now configured! You can test it by opening a web browser and typing in your server’s IP address into the URL bar. If everything is working correctly, you should see your website come up!

Leave a Reply

Your email address will not be published.